- Inicio
- Herramientas y Soluciones
- Sistemas de medición de torque
- Llaves dinamométricas
- DWTA Llave de Auditoría de Calidad en Delta 7D
- DWTA 150
DWTA 150
Llave de calidad DWTA 150 Nm.
DWTA 150 Descripción Tecnica
| Referencia | 6151657610 |
|---|---|
| Feedback type | Acoustic Buzzer and Leds on Delta 7D |
| Lever arm length | 342 mm |
| Compliance | ISO 6789:2017 & VDI-VDE 2645 - Part 3 |
| Min torque | 15 Nm |
| Tightening strategies | Yes |
| Drive (mm) | 14x18 |
| Quality strategies | Yes |
| Drive (in) | 0.55x0.71 |
| Power supply | 2 or 5m Cable to Delta 7D data collector (embedded Battery or ext. power supply) |
| Output drive type | Sq |
| Accuracy (ID accuracy_measurement tool) (%) | ±1% on torque reading value from 10% to 100% of nominal torque (CW and CCW) |
| Side to Center | 22.5 mm |
| Min torque | 11.1 ft.lbf |
| Autonomy (h) | 16h on Delta 7D h |
| Weight | 1.8 kg |
| Overload torque | 133 ft.lbf |
| Max torque | 111 ft.lbf |
| Unit measurement supported | N.m, lbs.ft, lbs.in, oz.ft, oz.in, kgf.m, kgf.cm, k.pm, d.Nm, degree |
| Output drive size (in) | 1/2 |
| Family | Manual torque wrenches |
| Length without ratchet | 418 mm |
| Subfamily | Digital torque wrenches |
| Tightening direction | CW and CCW |
| Type class | Type I, Class 3 |
| Curves memory capacity | 10 |
| Communicating | Yes |
| Results memory capacity | 5000 (on Delta 7D) |
| Overload torque | 180 Nm |
| End-fitting management | No |
| Angle measure | Yes |
| Max torque | 150 Nm |
